MANUAL DOSING OVERRIDE If as a result of a pool water test it is determined that the Chlorine and/or pH are not within acceptable levels, the Chemigem can perform a manual dosing operation to rapidly add Chlorine and pool Acid. Keypads No’d 5 and 6 carry out this function. Diary of a madman movie.

To request a service call please email your details to peter@chemigem.com.au. Also send the problem or reason for service, age of the unit and model number that will ensure we have the right parts. Download our manual dm52 chemigem eBooks for free and learn more about manual dm52 chemigem. These books contain exercises and tutorials to improve your practical skills, at all levels! These books contain exercises and tutorials to improve your practical skills, at all levels!

Normally it will only be necessary to have to dose one of the chemicals in this fashion but if for any reason both of these keypads are pressed at once, only the pH will operate. As soon as the manual-feed keypad is pressed the main screen will appear blank for 2 seconds after which it will display which feed is taking place. Mode gta san andreas.

Feeding will continue for about 20 seconds, while the keypad is pressed. When the display panel returns to normal, the dosing stops. Press again to repeat as many times as required. (Refer to page 23) RE-CALIBRATING pH The Chemigem has been equipped with a quick procedure to re-calibrate pH values. If for any reason the factory-settings are not the required levels, the unit can be recalibrated. Do not re-calibrate until identical pH readings have been obtained from at least three test kit results from around the pool. Steps to take once an accurate value of the pool pH has been obtained: - • Obtain MAIN MENU by pressing the ENTER keypad • Press keypad No.

6 to make “NEXT” flash, then press ENTER again • With “CALIB” flashing press ENTER again • Enter the value of the pool pH by pressing keypads No’d 7 or 8 to obtain the correct value • To activate this new value press both HELP and ENTER keypads together (keypads No’d 3 and 4) Instructions similar to above will appear on the screen and will scroll after 5 seconds. 26 Power Point 15 FITTING CHEMIGEM BELOW POOL WATER SURFACE LEVEL Solenoid valve pack Chlorine Filters Acid DM 52 controller Flow Return Pump Valve to produce suction Probe Skimmer box RE-CALIBRATING CHLORINE Recalibrating Chlorine(ORP)is not needed and it should not be actioned without the prior advice of Pool Controls. Injection point Probe Probe & injection point (tapping band) From bottom drain 16 25 FITTING CHEMIGEM WHEN HEATER IS IN CIRCULATION, USING VENTURI INJECTOR DEVICE Chemigem DM 52 May be positioned to suit owner but MUST be above the solenoid valve height.

Chemigem D10 has replaced the DM52 - your complete automated pool system management. Great as an add on for saltwater pools! Most salt chlorinators do not keep up with chlorine demand during the hotter months.

The Chemigem D10 will only add chlorine when it's required. Plus it will automatically add acid when the pH increases too! The Chemigem D10 is a unit designed specifically for the domestic pool and spa owner. This is the smallest model and is built to withstand wide variations in water condition, climate and environments.